Cobham SAILOR 6080 AC/DC Power Supply

The TT-6080A AC/DC Power Supply can deliver 300 W output power on average with a peak of 370 W for a minimum of 2 minutes. This is useful for MF/HF applications and DSC transmissions of 2 minutes duration. It is AC powered with a battery switch-over function. The AC/DC Power Supply has an on/off switch. It is lit when the power is turned on.

All connectors are placed at the same end of the power supply to simplify mounting and installation. The connector panel is protected by a transparent lid. To secure an installation with heavy cables a cable-relief bracket can be installed.

When mounted vertically the AC/DC Power Supply fulfills IP32 in areas with more than 42 V and IP22 in other areas. This means that the unit is protected against the intrusion of solid objects (including body parts like fingers), dust, water etc.

• IEC 60945 Maritime approval
• Two DC connectors, output, range: 28.7 V - 31.2 V
• Output power 300 W continuous, 370 W peak (2 min., 100-240 VAC) or
• 270 W continuous, 333 W peak (2 min., 90-100 VAC)
• AC input (100-240 VAC operating) with fuse (6.3 A)
• Automatic selection of input voltage range
• AC alarm and On/off switch
• Daisy-chaining of up to three units to give up to 900 W.1
• Short circuit protection
• Over-temperature protection (shutdown with automatic restart)
• Battery switch-over in case of AC supply failure, secured by 2 fuses (30 A)
• No forced cooling required
• IP 3X for internal high voltage areas (>42 V), IP 2X in other areas
• IP X2 when vertically mounted (wall) and connector panel is facing down