Special Order
Trojan Stainless Steel Disc Brake Hub and Stub Kit
Find it in store:
Deliver to:
New South Wales 2000,
AU
Estimated:
$159.99
Buy Now, Pay Later with
Find Local Store
Buy Now Pay Later with Afterpay. Available for purchases between $0.04 and $2000.
Report incorrect product information
These braked hub kits are designed to fit Trojan's Duratorque and beam axles but should also fit most NZ manufactured trailer axles. The Hubs have a 1500KG GVM (Gross Vehicle Mass) load rating which is based on a single axle and a pair of hubs. Trojan's range of hubs come in a wide variety of wheel stud patterns to suit the most common wheel sizes. The most common stud pattern 5 Stud with a PCD measurement 4 1/2 inch and fits Trojan's most commonly stocked rims and tyres. The hub kits in this range include a full cast disc or a fitted a bolt on disc in either cast iron or stainless steel. There are a pair of 38mm round stub axles included with a built in caliper mount. Brake calipers sold seperately.
Specifications:PCD Measurement
| Part No. | Rotor Type | Stud | PCD diameter | Stud width | 'x' in mm |
|---|---|---|---|---|---|
| T135105 | Integral | Blank | |||
| T135115 | Integral | 4 | 4 1/4 inch | 7/16 inch | 108.6mm |
| T135120 | Integral | 4 | 4 1/2 inch | 7/16 inch | 114.3mm |
| T135135 | Integral | 5 | 4 1/4 inch | 7/16 inch | 63.449mm |
| T135135 | Integral | 5 | 4 1/2 inch | 1/2 inch | 67.183mm |
| T135140 | Integral | 5 | 120mm | 7/16 inch | 70.535mm |
| T136125 | Cast Iron bolt on | 5 | 4 1/4 inch | 7/16 inch | 63.449mm |
| T136135 | Cast Iron bolt on | 5 | 4 1/2 inch | 1/2 inch | 67.183mm |
| T136140 | Cast Iron bolt on | 5 | 120mm | 7/16 inch | 70.535mm |
| T136335 | Stainless steel bolt on | 5 | 4 1/2 inch | 1/2 inch | 67.183mm |
| T136340 | Stainless steel bolt on | 5 | 120mm | 7/16 inch | 70.535mm |
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.