Victron Energy Battery Balancer
Deliver to:
New South Wales 2000,
AU
Estimated:
$22.99
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Extend your battery life
The service life of an expensive battery bank can be substantially shortened due to state of charge unbalance.
The Victron Energy Battery Balancer equalises the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.
If needed, several balancers can be paralleled. A 48V battery bank can be balanced with three Battery Balancers.
Victron Energy Battery Balancer Features:
- Battery balancing of 24V or 48V series or series-parallel connected banks
- Maximises service life of the bank
- Low standby current - 0.7mA
- LED status indicators showing voltage deviation
- Alarm relay (1A, normally open - closes on voltage deviation > 0.2V)
- Alarm rest via manual push button switch (not supplied)
- Over temperature protection
Victron Energy Battery Balancer Specifications:
- Input voltage range: Up to 18V per battery, 36V total
- Turn on level: 27.3V +/- 1%
- Turn off level: 26.6V +/- 1%
- Current draw when off: 0.7 mA
- Midpoint deviation to start balancing: 50 mV
- Maximum balancing current: 0.7A (when deviation > 100 mV)
- Alarm trigger level: 200 mV
- Alarm reset level: 140 mV
- Alarm relay: 60V / 1A normally open
- Alarm relay reset: Two terminals to connect a push button
- Over temperature protection: Yes
- Operating temperature: -30 to +50°C
- Humidity (non-condensing): 95%
- Colour: Blue (RAL 5012)
- Connection terminals: Screw terminals 6 mm² / AWG10
- Protection category: IP22
- Weight: 0.4kg
- Dimensions (H x W x D): 100 x 113 x 47 mm
- Safety EN 60950, CSA/UL 62368-1
- Emission EN 61000-6-3, EN 55014-1
- Immunity EN 61000-6-2, EN 61000-6-1, EN 55014-2
- Automotive Directive EN 50498
Victron Battery Balancer User Manual
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.