Nautic Alert Nevata 200 Series Dual Pumps HD

NEVATA - a SMART wireless sensor designed to control bilge pumps based on learning the characteristics of the pumps and understanding what is normal based on water level measurements obtained through sound waves and predictive analytics to identify the beginnings of a problem.

How effective is Nevata? As effective as detecting pin-size leaks and unexpected water entry due to potentially severe and life-threatening issues.

NEVATA continuously captures pump operating data, electrical data, water level data and test data while continuous performing analysis to detect events leading to a potential problem. Information is provided to Nautic Alert Insight X2 for deeper analysis of all onboard Nevata sensor data. Reports and graphs available to an owner through My Insights portal.

Nautic Alert compares cycle data from each controller, which is useful for spotting irregular patterns as shown in the diagram.
Use Case: Customer received notification due to 6 month old Rule 2000 pump experiencing an air-lock issue, where pump would not remove standing water.

Nautic Alert shows total runtime and cycles of each Nevata, stationary vs while underway.
Use Case: Useful for monitoring 3rd party systems such as Arid Bilge system, which was operating much more than usual as visually seen in the graph. In this case, the customer experienced an air lock issue due to an impeller jam, and was notified.

• Mounts Above Waterline
• Waterproof Enclosure
• Wireless Connectivity
• Pump Watchdog
• Anti-Slosh Pump Drive Logic
• Integrated Manual Override
• Integrated Solid State Pump Switches
• Integrated Pump Cycle Counters
• Integrated Pump Runtime Counters
• Integrated Custom High Water Detection
• Integrated High Water/3rd Party Notify
• Primary/Backup Pump Auto-Switching
• Works with external backup float and override
• Auto Configuration
• Flat Bottom Bilge Support
• Irregular Bilge Bottom Support
• Full replacement or compatible with existing float and overrides
• Manual Overrides
• Compatible with Nautic Alert Insight

• Pump Cycles
• Pump Cycles Set
• Pump Runtime
• Pump Runtime Set
• Pump Running Status
• Pump Fault Status
• Pump Max Current Consumption
• Cycle Time
• Cycle Period 
• Bilge Temperature
• Compartment Depth
• Compartment Water Level

• High Water Detection
• Critical High Water Detection
• Nevata Offline Detection

• Weekly Pump Test
• Developing Leak Detection/High Pump Activity
• Pump Runtime Detection
• Pump Failure Fault Detection
• Pump Overcurrent Fault Detection
• Pump Plumbing Trouble Detection (Requires Model NBPS200-
• or NBPS200-2R-HD)
• Pump Failure/Trouble Auto Switching (Requires Model NBPS200-2R or NBPS200-2R-HD)
• Bilge Pump Auto-Swapping (Requires Model NBPS200-2R or NBPS200-2R-HD)

Note:  ( Insight Required)

• Operating Voltage: 12V and 24V DC systems. Absolute min/max 10V-37V
• Operating Current: Does not include bilge pump or external siren: 20mA (12V), 24mW; Note: With Bilge Pump: See bilge pump electrical specifications
• Bilge Pump Max Current/Power: 16A/300W
• Sensor Range/Granularity/Accuracy: (From bottom of sensor) 1 to 32 inches, .1inch, +/-.1inch
• Operating Temperature: -20 to 55C
• Transducer Frequency: 44KHz to 46KHz
• Wireless Sync Range: Up to 100ft max (actual results will vary)