Special Order
AutoAnchor 150 Panel Mount Rode Counter
AutoAnchor 150 Panel Mount Rode Counter
Available Now
Deliver to:
New South Wales 2000,
AU
Estimated:
$0.00
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Rode length monitoring from the helm
The AutoAnchor 150 Panel Mount Rode Counter is a panel mount rode counter for DC electric windlasses using all-chain or rope/chain rode. Also suitable for hydraulic or AC powered windlasses using all-chain rode. The kit includes a console, a grey sensor, 2 magnets, a console fastening kit, installation instructions, motor load sensor terminators, diagrams and an operation manual for vertical windlasses.
AutoAnchor 150 Panel Mount Rode Counter Features:
- Rode length monitoring from the helm
- Large LCD display with adjustable red backlighting shows length
of anchor rode deployed. Display in feet or metres
- Docking alarm warns skipper when anchor is close to
docking
- Pre-programmed calibrations for rope/chain rodes
- Install up to two units or combine with the AA550RC, AA500C or
AA601 for multiple stations
- Standard 60mm (2.36) marine instrument console
AutoAnchor 150 Panel Mount Rode Counter Specifications:
- Power Supply: 12 or 24V DC
- Current Consumption: 30mA
- IP Rating: IP65 from the front provided the unit is mounted so
the back is protected from moisture
- Operating Temperature Range: 23oF to 140oF (-5oC to
60oC)
- Maximum Voltage: 30V DC
- Sensor: Compatible with all AutoAnchor sensors, reed switches
and some proximity switches
- Rode –Chain Only: Stainless or galvanised steel
- Rode –Rope and Chain: Must have a minimum of 10ft (3m) of
chain. Chain must be galvanised steel. Rope should be a good
quality nylon anchor rope. Type 66 or equivalent
- EMC Protection/CE: EN60945
Note: For DC windlasses a dual direction solenoid is required.
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.