Projecta PC1600 Pro-Charge 6-Stage Automatic Battery Charger 12V 16A
Projecta PC1600 Pro-Charge 6-Stage Automatic Battery Charger 12V 16A
Deliver to:
New South Wales 2000,
AU
Estimated:
$0.00
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Maximise battery life and performance
The Projecta PC1600 Pro-Charge 6-Stage Automatic Battery Charger is a fully automatic battery charger with 6 charge stages. Automatic charging protects your battery from being overcharged so you can leave the charger connected to the battery indefinitely. 6-stage charging is a sophisticated charging technique that gives your battery longer life and better performance compared to using traditional chargers. The PC1600 is suitable for most 12V automotive, marine and deep cycle batteries. They may also help restore drained and sulphated batteries.
Calcium Mode
Pro-Charge's Calcium mode adjusts the charging profile to suit calcium batteries for complete and proper charging. This charge mode is best suited to Calcium batteries that have been deeply discharged and require an equalisation charge to restore a full electrolyte reading.
Rejuvenation Mode
Pro-Charge's Rejuvenation mode can restore tired batteries by breaking down sulphation and revitalising the battery cells, increasing battery life and performance.
Swicthmode Technology
Using the latest technology in battery chargers, switchmode chargers convert 240V AC power to 12V DC power using electronic components unlike traditional battery chargers that rely on heavy transformers. This allows the charger to be lightweight and compact without sacrificing on performance.
Projecta PC1600 Pro-Charge 6-Stage Automatic Battery Charger Features:
- 6 Charge stages: Rejuvenation; Soft Start; Bulk; Absorption; Battery Test and Float
- Calcium mode: adjusts the charging profile to suit calcium batteries
- Rejuvenation mode: revitalises tired batteries, increasing battery life and performance
- Adjustable charge rate: output can be adjusted to suit the size of the battery for optimum
- Side mounting wings: optional mounting wings for permanent installation
- Switchmode Technology: converts 240VAC power to 12VDC power
- Safer charging: spark free and polarity protected
Projecta PC1600 Pro-Charge 6-Stage Automatic Battery Charger Specifications:
- Part number: PC1600
- Type: 6 Stage
- Input (Nominal): 240VAC, 50Hz
- Input Power: 432W
- Output Voltage: 12V
- Output Current: 2, 4, 8, 16A
- Minimum Start Voltage: 3.0V
- Back Drain: 1mA
Charge Control
- Rejuvenation: High frequency charge for 24 hours
- Soft Start: Half the rated set current up to 10.5V
- Bulk: Set current up to: 14.4V (Normal), 14.7V (Calcium)
- Absorption: Constant voltage 14.4V (NORMAL), 14.7V (Calcium) until current drops to the following set points - 2A-0.3A, 4A-0.6A, 8A-1.2A, 16A-2.5A
- Equalisation (Calcium mode only): Constant current 2.0A up to 16V then hold for 30 min or 12 hour timeout
- Analysis: Stops charging for 5 minutes, tests if battery is above 12.5V
- Float: 13.7V
Battery Range
- Deep Cycle: 14-320Ah
- Automotive: 80-1900CCA
- Marine: 110-2700MCA
- Types of Batteries: Most types of batteries including GEL, AGM, WET CELL and Calcium
- Size: 229 x 137 x 86 mm
- Weight: 1.5kg
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.