Seaflo 5 Chamber DC Diaphragm Pump 18.9LPM 60PSI 24V

Engineered for flexibility

The Seaflo 5 Chamber DC Diaphragm Pump is Seaflo's heavy-duty water pump. It provides high volume water flow with reduced pump cycling, thanks to the five-chamber diaphragm. This model is designed to run on water systems with no accumulator tank necessary, and up to five fixtures! It's also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin.

The Seaflo 5 Chamber DC Diaphragm Pump is self-priming, and can run dry without damage, performance reliable and low current. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when the faucet is opened and closed. Plus, it’s easy to install, service and winterise.

How a Diaphragm Pump Works
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet.

Seaflo 5 Chamber DC Diaphragm Pump Features:

• Five-chamber diaphragm provides high volume water flow with reduced pump cycling
• TTI pressure
• Threaded connections with multiple fittings allow connection to any outlet
• Motor sounds no louder than your room fan running
• Semi-rigid rubber feet for noise reduction from vibration
• Applications: Marine, RV, Agricultural, General Industrial, Filtration, Beverage Processing, Solar Water System
• Good heat dissipation
• Run dry safe

Seaflo 5 Chamber DC Diaphragm Pump Specifications:
Pump

• Type: 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
• Control Type: Pressure switch
• Max Recommended Temperature: 60° C（140° F）
• Priming Capabilities: 6 feet (1.8 m) suction lift
• Re-start Pressure: Shut-off Pressure 60 PSI ：48 PSI ±5 PSI (±0.3 bar)
• Inlet/Outlet Ports: 1/2"-14 MNPT
• Weight: 6.1 lbs (2.8 kg)

Motor

• Leads: 14 AWG, 13" (33 cm) long with 2-Pin connector / Leads
• Duty Cycle: Continuous
• Max.Amp Draw: 17.0 A
• Fuse: 25.5 A

Standard Pump Configurations:

• Model: SFDP2-050-060-51
• Voltage: 24V
• Open Flow (GPM/LPM): 5.0 / 18.9
• Control Type: Pressure Switch
• Max Draw: 9.0 A
• Shut-off Pressure (PSI/BAR): 60 / 4.2
• Valves: EPDM
• Diaphragm: Santoprene
• Ports: 1/2"-14 MNPT
• Wire Connections: 2-Pin/Leads