Projecta IC10 Intelli-Charge 7/5-Stage Automatic Battery Charger 12V 10A
Projecta IC10 Intelli-Charge 7/5-Stage Automatic Battery Charger 12V 10A
Deliver to:
New South Wales 2000,
AU
Estimated:
$0.00
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Maximise battery life and performance
Compact in size but full of features, the small yet powerful Projecta IC10 Intelli-Charge 7/5-Stage Automatic Battery Charger can be set to suit a range of battery chemistry types and sizes, ideal for charging deep cycle batteries used by travellers and work vehicles.
7-Stage Automatic Charging (GEL, AGM, WET and Calcium)
Intelli-Charge incorporates the latest technology to deliver a 7-stage charge suitable for automotive, calcium, marine and all types of deep cycle batteries (Gel and AGM). These stages of charging ensure maximum battery life and performance are delivered with a faster charging time and ensure a complete charge is achieved.
5-Stage Lithium Automatic Charging
When the Lithium Profile is selected, Intelli-Charge utilises a very specific and tailored 5 stage charging algorithm, engineered to get the best out of today's Lithium (LiFePO4) batteries. From the smallest 1 Amp unit up to the largest 50 Amp offering, world class electronics guarantee the battery receives the ultimate charge to ensure maximum life and performance over the life of the battery.
Multi-Chemistry
The Multi-Chemistry function allows you to set the charging profile to suit each battery's chemistry type (Lithium, GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Power Supply
When Power Supply mode is selected, you can safely run an appliance or load from your battery. An appliance can also be run directly from the battery clamps if required, for example using the charger as a memory saver when disconnecting the battery from the vehicle.
Switchmode Technology
Using the latest technology in battery chargers, switchmode chargers convert 240VAC power to 12VDC power using electronic components unlike traditional battery chargers that rely on heavy transformers. This allows the charger to be lightweight and compact without sacrificing on performance.
Projecta IC10 Intelli-Charge 7/5-Stage Automatic Battery Charger Features:
- 7 Charge stages: Desulphation; Soft Start; Bulk; Absorption; Analysis; Recondition and Float
- 5 Lithium charge stages: Soft Start 1; Soft Start 2; Bulk Charge; Absorption and Float
- Adjustable charge rate: output can be adjusted to suit the size of the battery for optimum charging
- Multi-chemistry: set the charging profile to suit battery chemistry type: Wet, Calcium, AGM, Gel or Lithium
- Power supply mode: retains vehicle computer settings when changing a battery or can run 12V appliances
- Charge status indicator: the CHARGING and FULLY CHARGED LEDs will illuminate and flash in various patterns to indicate the different stages of charging
- Polarity protection: prevents the output leads from sparking due to accidental reverse connection or short circuit
- Over temperature protection
- Switchmode Technology: converts 240VAC power to 12VDC power
- Cooling fan: fitted with a thermostatically controlled fan to cool onboard electronics and maintain charging performance
Projecta IC10 Intelli-Charge 7/5-Stage Automatic Battery Charger Specifications:
- Part number: IC10
- Type: 7/5 Stage
- Input (Nominal): 230-240 VAC, 50Hz
- Input Power: 160W
- Output Voltage: 12V
- Output Current: 10A, 6A, 4A, 2A
- Minimum Start Voltage: 2V
- Back Drain: 1mA
- Set Voltage: 13.8VDC
- Maximum Current: 10A
Charge Control - 7 Stage
- Desulphation: High Frequency Pulse charge up to 11V
- Soft Start: Half the rated set current up to 12V
- Bulk: Set current up to - 14.1V (GEL), 14.4V (AGM), 14.7V (WET), 14.7V (Calcium)
- Absorption: Constant voltage until current drops to - 2A-0.3A, 4A-0.6A, 6A-0.9A, 10A-1.5A
- Equalisation (Calcium mode only): Constant current (2.0A) up to 16V then hold for 1hr or 12hr timeout
- Analysis: Monitors battery for 90 sec
- Recondition: Constant current (0.3A-1.5A) for 4 hours limited to - 14.1V (GEL), 14.4V (AGM), 16V (WET), 16V (Calcium)
- Float: 13.7V
Charge Control - 5 Stage Lithium
- Soft Start 1: Charge at 5% of set current, until the battery reaches 8.0V
- Soft Start 2: Charge at 25% of set current, until the battery reached 10.0V
- Bulk: Set rate of current, up to 14.2V
- Absorption: 10% of the set rate of current
- Float: 13.5V
Battery Range
- Automotive: 80-1000CCA
- Marine: 110-1200MCA
- Deep Cycle: 14-200Ah
- Lithium: 4-100Ah
- Types of Batteries: Lithium, GEL, AGM, WET, Calcium
- Size: 202 x 61 x 108 mm
- Weight: 1.15kg
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.