DIY Hi-Tech Live Bait Kit 30L

Everything you need to set up your own live bait tank

A lure will catch you fish, but nothing sets a feeding frenzy faster than using live bait. And when it comes to live bait, the fresher the better! Looking to install a live bait tank on your boat without breaking the bank? Assemble it yourself and save that extra cash for a new rod!

The DIY Hi-Tech Live Bait Kit has everything you need to assemble and install a live bait tank on your boat!

Kit Includes:

• 1 x Hi-Tech Live Bait Tank 30L
  
• 1 x Seaflo Bilge Pump 12v 500GPH
  
• 1 x Transom Mounting Bracket for Live Bait Pump
  
• 1 x Access Hatch 375mm x 270mm
  
• 1 x Bung with Base 25.4mm x 59.2mm
  
• 1 x Seaflo Drain Socket 3/4''

The Live Bait Tank
There's nothing like fresh bait when it comes to catching the best fish. So keep them fresh inside the Hi-Tech Live Bait Tank. It's made from the highest quality LMDPE (Linear Medium Density Polyethylene) High Impact Polymer and moulded in one piece with no seams for years of service. And what's more it's UV-stabilised to prevent discolouration, distortion and cracking. Plus it meets New Zealand and Australia standards so you know you're getting one of the best live tanks available in the market today.

The Bilge Pump
The Seaflo Bilge Pump 1100 Series is a submersible bilge pump fitted with a stainless steel shaft and a heavy-duty motor with an impact-resistant ABS housing. It features a snap-lock strainer base for easy installation.

The Mounting Bracket
This Transom Mounting Bracket for Live Bait Pump is a stainless steel, heavy-duty bracket with an intake pipe to feed water up to the pump. The pipe sits under the hull line so water is still fed to pump when your boat is underway or on the plane. Custom-designed to work with Seaflo 1100 bilge pumps.

Other Accessories
Access Hatch
This Access Hatch features a low-profile design with radiused corners, clean-skirted edges and hidden fasteners. It features UV stabilised ABS construction with a non-skid surface - specially made to suit the harshest marine conditions. Plus, it comes with integral 180° hinges with a slam or cam latch system to assure perfect alignment and ease of installation.

Bung and Base
This Bung and Base Complete Set will not jar loose - and forms a vacuum tight seal around the mouth of a drain. The bung is made of nylon, protecting against rust and particle build-up. It also features a quick-turn coarse thread for a secure fit. Install this bung and base set for quick and easy drainage. No more uneven seals and leaky drains!

Drain Socket
Give your drain holes a nice, clean look with the Seaflo Plastic Skin Fitting. Made from UV stabilised, anti-aging ABS plastic suitable for marine use, plus it makes your drain holes easier to clean.

Hi-Tech Live Bait Tank Features:

• Model number: LBT09
  
• Made of LMDPE (Linear Medium Density Polyethylene) High Impact Polymer
  
• UV stabilised
  
• One piece moulded plastic (no seams)
  
• 30L capacity
  
• Dimensions (L x W x D): 390 x 290 x 390mm (approx 30ltrs)
  
• Plastic approx. 3mm thick

Note: This product doesn't come with a lid. Ideal for customising your own live bait tank and lid.

Seaflo Bilge Pump 1100 Series Features:

• High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour)
  
• Small size, high efficiency, low current (low cost switching power supply supporting)
  
• Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition
  
• Impact-resistant ABS housing
  
• Heavy-duty motor with stainless steel shaft and tough, thermoplastic body
  
• Totally submersible and ignition protected
  
• Water cooled motors for long life
  
• Anti airlock design
  
• Moisture tight seals
  
• Snap-lock strainer base for easy installation and removal and silent vibration free running
  
• No burn out if it runs dry

Seaflo Bilge Pump 1100 Series Specifications:

• Flow rate: 500GPH
  
• Voltage: 12V
  
• Current: 2.2A
  
• Head: 3m
  
• Wire lead: 1m
  
• Outlet diameter: 19mm/3/4’’
  
• Weight (n.w./g.w.): 0.33/0.40kg

Transom Mounting Bracket for Live Bait Pump Features:

• Mounts Seaflo bilge pumps to the transom
  
• Material: heavy-duty stainless steel
  
• Integral water scoop
  
• Used to feed water up to live bait tanks, tuna tubes etc.
  
• Pipe sits under hull line so water is still fed to pump when boat is underway / on the plane.
  
• Designed to work with the Seaflo 1100 pumps but could easily be adapted to suit other pumps
  
• Dimensions (WxD): 100 x 80mm
  
• Intake pipe diameter: 15mm

Boat Access Hatch - Square Features:

• Corrosion free synthetic fittings and durable rubber seals
  
• Low profile hatch, designed for installation on internal or external flat surface
  
• Heavy duty, UV stabilised white ABS construction
  
• ABS Anti-aging, Anti-ultraviolet
  
• Reinforced lid with non-skid surface
  
• The lid hinges 180° and completely covers the mounting flange for an attractive flush finish
  
• Rubber seal ensures weatherproofing when mounted on vertical surfaces
  
• Supplied with 2 strong recessed handles
  
• Easy to install, pre-drilled countersunk fastening holes (screws not included)
  
• Easy “click-in”construction

Boat Access Hatch - Square Specifications:

• Colour: White
  
• Dimensions: 16 x 12 x 6in
  
• External dimensions: 14.75in x 10.6in (375mm x 270mm)
  
• Opening dimensions: 11.4in x 7.5in (291mm x 192mm)
  
• Weight: 4lbs

Bung and Base Complete Set Features:

• Heavy-duty bung set
  
• Material: Nylon and Fibre
  
• Colour: Black
  
• For quick and easy drainage
  
• Dimensions (DxL): 25.4. x 59.2mm (Large)

Seaflo Plastic Skin Fitting Features:

• Heavy duty, UV stabilised white ABS construction
  
• Sizes: 3/4"
  
• Dimensions: 80 x 50.5mm
  
• Colour: White