Airmar B164-20-RAY 1kW Bronze Thru-Hull Transducer 20-Degree Tilt Raymarine Radar
Airmar B164-20-RAY 1kW Bronze Thru-Hull Transducer 20-Degree Tilt Raymarine Radar
Airmar B164-20-RAY 1kW Bronze Thru-Hull Transducer 20-Degree Tilt Raymarine Radar
Buy now, pay later & Finance Options
Find Local Store
Airmar B164-20-RAY 1kW Tilted Element Bronze Thru-Hull Transducer 20-Degree Raymarine Radar Connector
Fits: L755, 760, 770, 1250, DSM30, 250,
300
Step up to a 1kW-Without a Fairing! Airmar has taken Airmar's innovative Tilted Element technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all.
Low-profile protrusion below the hull - no affect on your boats running performance
The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:Features:
- 1 kW (1,000 Watts) RMS Power
- Frequency: 50/200 kHz
- Cone:
-
- 50 kHz-22 degrees x 20 degrees
- 200 kHz- 6 degrees x 6 degrees
- Maximum Depth Range:
-
- 50 kHz-353 m to 529 m (1,200' to 1,800')
- 200 kHz-152 m to 235 m (500' to 800')
- Engineered for center-console and trailered boats
- Interfaces to any 600 W or 1 kW echosounder
- Bronze (B164) or Stainless Steel (SS164) housings available
- Depth and new fast-response water-temperature sensor
- Boat Size: 8 m to 11 m (25' to 35')
- Usable Shaft Length: approx. 71 mm (2.80)
- Fixed 0 degrees tilted version for 0 degrees to 7 degrees hull deadrise
- Fixed 12 degrees tilted version for 8 degrees to 15 degrees hull deadrise
- Fixed 20 degrees tilted version for 16 degrees to 24 degrees hull deadrise
- 10M Cable included
- Raymarine A102113