Airmar B175C-0-M-MM 1kW Medium Frequency CHIRP 0 Degree Tilt Mix and Match
Airmar B175C-0-M-MM 1kW Medium Frequency CHIRP 0 Degree Tilt Mix and Match
Buy now, pay later & Finance Options
Find Local Store
Low-profile tilted through-hull single-band 1kW CHIRP fishfinder
transducer.
The B175 is available in the Low, Medium or High bands, or in a
High-band version with widebeam. All versions are available with
zero, 12 deg or 20 deg tilt.
Specifications:
| Type | CHIRP single-band fishfinder transducer |
| Low Band | Frequency range 40-60 kHz / Beam width 32-21 degrees |
| Medium Band | Frequency range 85-135 kHz / Beam width 16-11 degrees |
| High Band | Frequency range 130-210 kHz / Beam width 10-6 degrees |
| High Wide Band | Frequency range 150-250 kHz / Beam width 25 degrees |
| Power Rating | 1000 watts |
| Mounting | Low-profile through-hull |
| Housing | Bronze |
| Hull Aperture | 3.75' (95mm) |
| Usable Shaft Length | 2.80' (71mm) |
| Cable Length | 10 meters |
| Mix and Match | Yes |
| Temperature Sensor | Yes |
| Speed Sensor | ? |
| Retractable Insert | ? |
| Tilted | Yes |
| Status | In production |
| Reference Page |
Product Data Sheet
Base Models
These Mix and Match base models must be combined with a Mix and
Match cable for installation. The suffix '-MM' in the Gemeco part
number designates a Mix and Match base model.
| Transducer | Code | Airmar Part # | Tilt | Description |
|---|---|---|---|---|
 |
B175C-0-H-MM | 41-567-2-01 | 0 degrees | High Band, zero tilt |
|
B175C-0-HW-MM | 41-697-2-01 | 0 degrees | High Band, zero tilt, Widebeam |
|
B175C-0-L-MM | 41-561-2-01 | 0 degrees | Low Band, zero tilt |
|
B175C-0-M-MM | 41-564-2-01 | 0 degrees | Medium Band, zero tilt |
|
B175C-12-H-MM | 41-568-2-01 | 12 degrees | High Band, 12 deg tilt |
|
B175C-12-HW-MM | 41-698-2-01 | 12 degrees | High Band, 12 deg tilt, Widebeam |
|
B175C-12-L-MM | 41-562-2-01 | 12 degrees | Low Band, 12 deg tilt |
|
B175C-12-M-MM | 41-565-2-01 | 12 degrees | Medium Band, 12 deg tilt |
|
B175C-20-H-MM | 41-569-2-01 | 20 degrees | High Band, 20 deg tilt |
|
B175C-20-HW-MM | 41-699-2-01 | 20 degrees | High Band, 20 deg tilt, Widebeam |
|
B175C-20-L-MM | 41-563-2-01 | 20 degrees | Low Band, 20 deg tilt |
|
B175C-20-M-MM | 41-566-2-01 | 20 degrees | Medium Band, 20 deg tilt |
Mix and Match Cables
This transducer uses the CHIRP Mix and Match system.
Installation requires two parts - a base model plus one of the
CHIRP Mix and Match (MMC) cables listed below.
Each base model has a 9 meter pigtail cable permanently attached.
This cable ends in an Airmar 11-pin female connector. The Mix and
Match cables are 1 meter long and have a male Airmar 11-pin
connector at one end (to connect to the transducer pigtail) and a
brand-specific connector at the other end (to connect to the
sounder or fishfinder). If an owner changes their fishfinder or
sounder, a different MMC cable can be installed without disturbing
the transducer itself or needing to re-run cable through the
boat.
| Cable Connector | Code | Airmar Part # | Length | Equipment |
|---|---|---|---|---|
 |
MMC-0 | 33-1359-01 | 1 meters | Bare wire applications |
 |
MMC-11R-HM | 33-1402-01 | 1 meters | Raymarine High/High Wide/Medium Band 11-pin |
 |
MMC-11R-LDB | 33-1357-01 | 1 meters | Raymarine Low and Dual-Band 11-pin |
 |
MMC-12G | 33-1356-01 | 1 meters | Garmin orange 12-pin |
 |
MMC-14HB | 33-1386-01 | 1 meters | Humminbird 14-pin |
 |
MMC-8G | 33-1354-01 | 1 meters | Garmin blue 8-pin |
 |
MMC-9N | 33-1394-01 | 1 meters | Navico 9-pin |
 |
MMC-9N2 | 33-1395-01 | 1 meters | Navico Dual 9-pin |
 |
MMC-BL | 33-1355-01 | 1 meters | Lowrance/Simrad blue 7-pin |
 |
MMC-BL2 | 33-1358-01 | 1 meters | Lowrance/Simrad Dual Y-cable blue 7-pin |
 |
MMC-HB | 33_1385-01 | 1 meters | Humminbird #9 |
Replacement Parts
| Part | Airmar Part # | Description |
|---|---|---|
 |
02-136-02 | Bronze Hull Nut |
 |
164WR-1 | Crows Foot Wrench |
 |
164WR-2 | Single Handle Wrench |
 |
164WR-3 | Double Handle Wrench |
 |
175WR-4 | Single Handle Wrench |
 |
20-618-02 | Spacer |