Special Order
Actisense NGX-1-USB NMEA 2000 Dual Gateway USB Cable
Available Now
Deliver to:
New South Wales 2000,
AU
Estimated:
$0.00
Buy Now, Pay Later with
Find Local Store
Report incorrect product information
Full control and visibility of your vessel data
Unlock the full potential of your vessel's electronics. The Actisense NGX-1-USB NMEA 2000 Dual Gateway USB Cable is your ultimate bridge between older NMEA 0183 instruments and modern NMEA 2000 networks, allowing you to integrate all your crucial boat data directly with your PC. Whether you're upgrading your setup or simply want to view real-time navigation and engine information on a laptop running popular chartplotter applications like TimeZero or OpenCPN, the NGX-1-USB makes it simple, efficient and cost-effective.
Designed for the harsh marine environment, the USB version of the NGX-1 features full isolation to prevent dangerous ground loops, safeguarding your valuable onboard electronics from electrical surges. It acts as a vital NMEA 2000 diagnostic tool, allowing you to troubleshoot network issues quickly with the included FREE NMEA Reader software. With its extensive conversion library supporting all NMEA 2000 PGNs and a wide range of NMEA 0183 messages, including critical AIS data, you'll have all the information you need at your fingertips. Plus, with support for Fast Heading at 10Hz, you'll get accurate, rapid heading data for precise navigation, while the built-in network firewall protects your marine network integrity. Easily configure and update your Actisense products using the powerful Actisense Toolkit, ensuring your system is always running optimally. This is a must-have for any boater looking for versatile and reliable data networking on the water.
Actisense NGX-1-USB NMEA 2000 Dual Gateway USB Cable Features:
- Allows all major PC Chartplotter applications to interface with the NMEA 2000 bus
- Provides a rule-enforcing firewall between the PC and the NMEA 2000 bus
- Powerful diagnosis of the NMEA 2000 network using the FREE NMEA Reader software provided
- Configure and flash-update Actisense products on the bus
- Upgrade NMEA 0183 equipment to NMEA 2000
- Allow NMEA 0183 devices to receive vital NMEA 2000 data
- Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together
- Reliable, renowned bi-directional conversion engine
- Supports a wide range of conversions including AIS
- Easily configurable using Actisense Toolkit
- Vital NMEA 2000 diagnostic tool
- USB version is fully isolated to prevent dangerous ground loops
- Up to 230,400 baud data transfer rate
- Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set
- Supports Fast Heading at 10Hz
- Multiple diagnostic LEDs
Actisense NGX-1-USB NMEA 2000 Dual Gateway USB Cable Specifications:
- NGX-1-USB: equipped with a USB cable to allow Plug and Play connectivity with a PC
- Supply Voltage (NMEA 2000 Port): 9 to 30V DC
- Supply Current (USB Host Port): 10mA @ 5V DC
- Supply Current (NMEA 2000 Port): 62mA @ 9V DC
- Load Equivalent Number (LEN): 2
- Compatibility: USB 1.1, 2.0 and 3.0
- Speed / Baud Rate: 4800 to 230400 Baud
- Connectivity: Male type A plug moulded onto cable
- Cable Length: 1.8m
- NMEA 2000 Port to USB Port: Galvanic Isolation, Hi-Pot tested to 1000V
- Housing Material Body: Flame retardant Polycarbonate
- Housing Material End Caps: Flame retardant PBT
- Weight NGX-1-USB: 113g
- Environmental Protection: IP67
- Operating Temperature: -25°C to +70°C
- Storage Temperature: -30°C to +70°C
- Recommended Humidity: 0 to 93% RH @ 40°C
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.