Seaflo 5 Chamber DC Diaphragm Pump 18.9LPM 60PSI 24V
Deliver to:
New South Wales 2000,
AU
Estimated:
$34.99
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
The item you're looking at is currently unavailable or has limited stock, how about this one instead?
Engineered for flexibility
The Seaflo 5 Chamber DC Diaphragm Pump is Seaflo's heavy-duty water pump. It provides high volume water flow with reduced pump cycling, thanks to the five-chamber diaphragm. This model is designed to run on water systems with no accumulator tank necessary, and up to five fixtures! It's also suited for use with a holding tank water system, as may be found in a boat, RV or remote cabin.
The Seaflo 5 Chamber DC Diaphragm Pump is self-priming, and can run dry without damage, performance reliable and low current. This automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when the faucet is opened and closed. Plus, it’s easy to install, service and winterise.
How a Diaphragm Pump Works
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet.
Seaflo 5 Chamber DC Diaphragm Pump Features:
- Five-chamber diaphragm provides high volume water flow with reduced pump cycling
- TTI pressure
- Threaded connections with multiple fittings allow connection to any outlet
- Motor sounds no louder than your room fan running
- Semi-rigid rubber feet for noise reduction from vibration
- Applications: Marine, RV, Agricultural, General Industrial, Filtration, Beverage Processing, Solar Water System
- Good heat dissipation
- Run dry safe
Seaflo 5 Chamber DC Diaphragm Pump Specifications:
Pump
- Type: 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
- Control Type: Pressure switch
- Max Recommended Temperature: 60° C(140° F)
- Priming Capabilities: 6 feet (1.8 m) suction lift
- Re-start Pressure: Shut-off Pressure 60 PSI :48 PSI ±5 PSI (±0.3 bar)
- Inlet/Outlet Ports: 1/2"-14 MNPT
- Weight: 6.1 lbs (2.8 kg)
Motor
- Leads: 14 AWG, 13" (33 cm) long with 2-Pin connector / Leads
- Duty Cycle: Continuous
- Max.Amp Draw: 17.0 A
- Fuse: 25.5 A
Standard Pump Configurations:
- Model: SFDP2-050-060-51
- Voltage: 24V
- Open Flow (GPM/LPM): 5.0 / 18.9
- Control Type: Pressure Switch
- Max Draw: 9.0 A
- Shut-off Pressure (PSI/BAR): 60 / 4.2
- Valves: EPDM
- Diaphragm: Santoprene
- Ports: 1/2"-14 MNPT
- Wire Connections: 2-Pin/Leads
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.