VETUS Ignition Protected Bow Thruster 45kgf 12V
VETUS Ignition Protected Bow Thruster 45kgf 12V
Deliver to:
New South Wales 2000,
AU
Estimated:
$169.99
Buy now, pay later & Finance Options
Find Local Store
Report incorrect product information
Installing an electric bow or stern thruster in a petrol (gasoline)
engined boat can be very dangerous, due to the possibility of the
electric motor igniting fuel vapour. In order to eliminate the
risk, this special housing will shield the bow or stern thruster
from potentially explosive vapour.
The housing enables the thruster to comply with the ISO 8846 Marine ignition protection standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components.
An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit.
Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space.
Specifications:
Product Data Sheet
The housing enables the thruster to comply with the ISO 8846 Marine ignition protection standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components.
An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit.
Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space.
Specifications:
| Voltage (V) | 12 V |
|---|---|
| Ignition protection | Yes |
| Thrust (N / kgf) | 450 / 45 |
| Power (kW) | 3 |
| Motor, reversible D.C. | Yes |
| Internal tunnel diameter (mm) | 125 |
| Weight (kg) | 20 |
| Current consumption (A) | 300 |
| Continuous operating time (min) | 4 |
| Max. operating time (minutes) | 4 |
| Main fuse 'slow blow' (A) | 250 |
| Batteries 12 V, min./max. Ah | 1x105 / 1x200 |
| Battery cables, length pos./neg. cables (m/mm) | 0-12 / 70 |
| Battery main switch: model BATSW / type BPMAIN | 250 / 12 |
| Size A in mm, see drawing | 195 |
| Size B in mm, see drawing | 400 |
| Size C in mm, see drawing | 79 |
| Size D min./max. in mm, see drawing | 250 / 500 |
| Size E in mm, see drawing | 250 |
| Size F, diameter in mm, see drawing | 195 |
| Size G min. in mm, see drawing | 125 |
| Size H, diameter in mm, see drawing | 125 |
Product Data Sheet
Note: This listing is for the VETUS Bow Thruster ONLY. This is not a complete kit. Tunnel, data cable, control panel, fuse and fuse holder is still needed. Please note thruster packages are spec’d up individually to suit each customer’s needs. Please contact a Marine Deals sales specialist to ensure you get the complete and ideal components for your build. Contact our sales team via: 0800 633 257 / 09 281 3150 (NZ) or 1800 154 713 (AU)
Some of our product deals are strictly limited - once they're gone, they're gone! Secure yourself this amazing deal while stocks last...by clicking the Add to Order button above.